Wall Mounting
NOTE: For best results, charge the telephone/answering system on a flat surface before hanging it on the wall.
Slip the mounting holes (on the back of the base) over the wall plate posts and slide the unit down into place. (Wall plate not included.)
Registration
YOU MUST REGISTER BOTH HANDSETSTOTHE MAIN BASE BEFORE USE!
a)1st handset - The 1st handset being charged on the main base station will automatically register after 16 hours of charging.
b)2nd handset - After the 2nd handset has been charged for 16 hours on the extra charger, place it on the main base station for 20 seconds, it will then automatically register.
NOTE: “PLEASE REGISTER” will show on the display if the handsets have not been registered. Once the handsets have completed regisration successfully, “HANDSET 1” and “HANDSET 2” will show on the handset’s display.
NOTE: In case of a power failure of more than 5 minutes, you must put both handsets on the main base cradle for 20 seconds to
Answering System Setup
This section shows you how to set up your answering system to receive incoming calls. Before you begin the set up process, you must turn on the answering system.
10
