GE 25860 manual Call Transfer, Use Indicator, Redial, Flash

2.When finished, place the handset back in the cradle, or press the talk/ callback button again.

IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless in the event of a power failure.

Call Transfer

During an external call, you may transfer the external call to another handset.

1.Press the transfer/answerer button on the originating handset. TRANSFERRING shows in the display.

2.Press the transfer/answerer button or talk/callback button on receiving handset to answer the call.

NOTE: To cancel the call transfer, you may press the *exit or transfer/ answerer button on the originating handset.

In Use Indicator

When the handset is ON (inTALK mode), the talk/callback button lights up when the handset is taken off-hook.The charge/in use indicator on the base is lit. During an incoming call, the in use indicator on the base and the handset talk/callback button flash on and off. When the handset is taken off-hook, talk/end/callback button illuminates and remains on until handset

is put on-hook.

Redial

1.Press the talk/callback button on the handset.

2.Press the redial button to redial the last number you called (up to 32 digits). If you get a busy signal, and want to keep dialing the number, press redial to dial the number directly.

Flash

Use the flash/prog button on the handset to activate custom calling services, such as call waiting or call transfer, which are available through your local phone company.

TIP: Don’t use the talk/callback button to activate custom calling services such as call waiting, or you’ll hang up the phone.

16