Handset Sound Signals
Signal | Meaning |
A long warbling tone (with ringer on) | Signals an incoming call |
Three short beeps (several times) | Page signal |
Single beep every 7 seconds | Low battery warning |
Two short beeps | Error tone |
Display Messages
The following messages shows the status of the phone, provides Caller ID information, or helps you set up and use your phone.
ERROR | Caller information is interrupted during |
| transmission, or the phone is excessively noisy. |
ENTER TEL NUMBR | Prompt telling you to enter a telephone number in |
| one of the 10 memory locations. |
ENTER NAME | Prompt telling you to enter the name for one of |
| the 10 memory locations. |
DELETE ALL? | Prompt asking if you want to erase all |
| Caller ID records. |
DELETE CALL ID? | Prompt asking if you want to erase a Caller ID record. |
DELETED | Prompt confirming the Caller ID record is erased. |
END OF LIST | Indicates that there is no additional information in |
| Caller ID memory. |
NEW | Indicates call or calls have not been reviewed. |
UNKNOWN NAME/ | The incoming call is from an area not serviced by |
CALLER/NUMBER | Caller ID or the CID information was not sent. |
PAGING | Indicates the page button on the base is pressed. |
BLOCKED CALL | The caller’s number is blocked from transmission. |
28
