2.Use the CID-VOL (- or +) buttons on the handset or the handset touch- tone pad to select 1, 2, or 3.

3.Press the flash/prog button again.

NOTE: Press the *exit button once to keep the previous setting and return to the standby screen.

Factory Default

As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings.

1.Press the flash/prog button until DEFAULT shows in the display.The default is NO.

2.Use the CID-VOL (- or +) buttons to select YES or NO. (or press 1 to select NO or press 2 to select YES)

3.Press the flash/prog button again.You will hear a confirmation tone.

NOTE : The default settings are “ENGLISH, AREA CODE - - -”, and “RINGER TONE 1”.

NOTE : Press the *exit button once to keep the previous setting and return to the standby screen.

Telephone Operation

Making a Call

1.Pick up the handset, and press the talk/callback button.

2.When you hear a dial tone, dial a telephone number.

3.When finished, press the talk/callback button again to hang up.

OR

1.Dial the phone number first, then press the talk/callback button.

2.When finished, press the talk/callback button again to hang up.

NOTE: If you make a mistake press the del/chan button to backspace and erase the wrong number(s).

Answering a Call

1. Pick up the handset, and press the talk/callback button.

NOTE: The talk/callback button is disabled when the handset is in the cradle.

15

Page 15
Image 15
GE 25860 manual Telephone Operation, Factory Default, Making a Call, Answering a Call