GE 25880 Basic Operation, Default Setting, Answering a Call, Cordless Handset, Corded Handset

4.Press the flash/prog button on the handset until LINK BASE? shows in the display. NO is the default setting.

5.Press caller ID/vol (- or +) button on the handset to scroll to YES.

6.Press flash/prog on the handset again to confirm.You will hear a long confirmation tone when the handset is successfully linked to the base.

Default Setting

NOTE: This setting may be made with the base or the cordless handset.

1.Press the program/flash button on base or flash/prog button on handset until DEFAULT SETTING or DEFAULT shows in the display. NO is the default setting.

2.Use the touch-tone pad to select 1YES or 2NO, or press the caller ID (rev or skip) button on the base or caller ID/vol (- or +) button on the handset to scroll toYES or NO.

NOTE: If you choose YES all settings in the programmable menu return to factory defaults except day and time.

3.Press the program/flash button on base or flash/prog button on handset again to store your selection.

Basic Operation

Answering a Call

Check the display to see who is calling.

NOTE: You can only use one handset at a time. UNAVAILABLE will be displayed if other handset is in use.

Cordless Handset

1.Press the talk/end/call back button on the handset.

2.When finished, press talk/end/call back or place the handset in charging cradle to hang up.

Corded Handset

1.Lift the handset.

2.When finished, put the handset back on the cradle to hang up.

17