Inserting a Pause in the Dialing Sequence of a Stored Number
If a pause is needed to wait for a dial or access tone, press the # button to insert a delay in dialing sequence of a stored number (for example, after you dial 9 for an outside line, or to wait for a computer access tone). Pause shows in the display as a P, and each pause counts as one digit in the dialing sequence.
Changing a Stored Number
1.Repeat steps 1 through 7 in Storing a Name and Number in Memory.
2.Press the mem button, and REPLACE MEMO? shows in the display.
3.Press the mem button to store the number. You will hear a confirmation tone.
Reviewing and Deleting Stored Numbers
1.To review stored numbers, press the mem button, and use the CID/vol (5 or 6) button to scroll to the memory location, or press the corresponding number key for a desired memory location
34
