Cordless Phone Solutions

No dial tone

Check installation:

Make sure the base power cord is connected to a working electrical outlet.

Make sure the telephone line cord is connected to the base unit and the wall phone jack.

Connect another phone to the same modular jack; if the second phone doesn’t work, the problem might be with your wiring or local service.

The handset may be out of range of the base. Move closer to the base.

Make sure the battery is properly charged (for 16 hours).

Ensure the battery pack is installed correctly.

Did the handset beep when you pressed the talk/ call back button? Did the in use/charge indicator come on? The battery may need to be charged.

Place the handset in the base for at least 20 seconds.

Handset does not ring

Make sure the RINGER switch on the handset is turned ON.

42

Page 42
Image 42
GE 27906 manual Cordless Phone Solutions