GE 27959 manual Remote Access, Leaving a Memo, Using the Handset

2.Press the delete/erase button on base again. ALL PLAYED MSG ERASED shows in the display.

•To erase a message from the handset:

1.Press the format/answerer button on the handset.

2.Press the play/stop button on the handset (the 2 key).

3.Press erase on the handset (the 0 key) to erase the message that is playing.

NOTE: Erased messages cannot be restored. Also, be careful not to press the erase button as the next unheard message is playing because that message will also be erased.

LEAVING A MEMO

Use the memo feature to leave a message.

1.Press and hold the memo button.

2.Begin speaking after you hear the beep.

3.Release the memo button when you are finished recording the memo.

REMOTE ACCESS

This section explains two types of remote access: using the handset to access the answering system and accessing the answering system from another location.

You may access the answering system on the base with the handset buttons.

You may also access your answering system from any touch-tone phone by entering a 3-digit security code after you hear the outgoing announcement. A voice menu system guides you through the steps.

USING THE HANDSET

Press the format/answerer button to access the answering system.

After you access the answering system, use the marked handset keys just as if you were pressing the corresponding buttons on the base (see “Answering System Operation” for details on functions). To make it easy for you, the functions are listed on the handset above each number. For example, to play messages:

36