GE 28128 manual Deregistration, Global De-Registration

Registration

From the Phone Setting menu:

1.Use the or button to scroll to Registration.

2.Press the Select (SKL) button to enter the menu.

3.Use the or button to scroll to No or Yes. The default is No.

4.Press the Select (SKL) button to save your selection

5.If you select Yes, HOLD BASE MUTE WAIT FOR BEEP shows in the display. (Your handset should be held near the base during registration process.)

6.Press and hold the MUTE button on the base. REGISTRATION... shows in the base display. Registration Successful shows in both the handset and base displays.

Deregistration

From the Phone Setting menu:

1.Use the or button to scroll to Deregistration.

2.Press the Select (SKL) button to enter the menu.

3.Use the or button to scroll to No or Yes. The default is No.

4.Press the Select (SKL) button to save your selection

5.If you select Yes, the handset will automatically be deregistered. Successful Deregistration shows in the display, followed by HANDSET NEEDS REGISTRATION and PLEASE PUT HANDSET IN BASE.

6.Place handset in base to automatically re-register to base.

Global De-Registration

If one or more handsets become lost, you should de-register all handsets to ensure proper system operation. Follow the steps below to deregister all handsets at the same time.

WARNING: It is not recommended that a handset be deregistered unless absolutely necessary because once a handset is deregistered, that handset’s telephone features cannot be used until the handset is re-registered.

NOTE: Before starting global deregistration procedure, let all handsets set idle for 20 seconds.

1.Disconnect the power from the base by unplugging the DC connector on back of base.

2.Press and hold the MUTE button on the base again and reconnect the power.

3.Hold the MUTE button until base displays Deregister All Handsets.

29