12
ADVANCED FEATURESCHANNEL BUTTON (CHAN)
If you ever experience any interference or don’t have clear voice quality,
press the CHAN button on the handset to advance to another channel (you
will hear two sets of two beeps).
THE MEMORY FEATURE
MEM (memory)
button
VOL MEM REDIAL
FLASH CHAN MUTE
CHANGING A STORED NUMBER
Use the same procedure to change a stored number as you do to store a
number—in a sense, you’re just reassigning the memory location.
Store up to 10 numbers in memory for quick dialing.
STORING A NUMBER IN MEMORY
The phone must be OFF when you store numbers.
1. Press the MEM button (TALK light will blink).
2. Dial the number (up to 18 digits).
3. Press MEM.
4. Press any number key (0-9) to store the dialed
number in that memory location (you will hear
three beeps).
If you hear a buzzing tone, you have made an error (or
have waited longer than 30 seconds without pushing
any buttons) which means the programming has
ended. A chirping tone means you have pressed a
button, such as FLASH, that cannot be stored in
memory, but you can still continue programming the
number into memory.