8
PAGE/FIND
AUXILLIARY
CHARGER
CHARGE
IN USE
WALL MOUNT INSTALLATION
1. Plug one end of the short telephone
line cord into the jack marked PHONE
LINE on the back of the unit, and plug
the other end into a modular wall jack.
2. Connect the power supply adapter to
the POWER 12V DC jack on the back of
the unit, and plug it into an AC outlet.
3. Slip the mounting holes over the wall
plate posts and slide the unit down
firmly into place. (Wall plate not
included.)
4. Set the TONE/PULSE switch to TONE
you if have touch-tone service or to
PULSE if you have rotary dial service.
5. Select either OFF, LO, or HI (on the
base) for the preferred ringer volume.
If you select OFF, the handset will not
ring with incoming calls or paging, but
the TALK button will light.
6. Place handset in the base to charge for
8 hours. The CHARGE light comes on
indicating that the battery is charging.
A low battery warning (BATT LOW
light and warning tone) will remind
you to charge the handset batteries for
at least 8 hours.
21
3
54
6