Load Sensing
Load sensing is disabled when shipped from the factory. This feature can be enabled if desired. Setting parameter 29 to a value of 1 will enable the Load Sense function.
-Parameter No: 29
-Length: 1 Byte
-Valid Values = 0 or 1 (default 0)
Note: When replacing a burned-out light bulb, the load sensing feature (if enabled) will automatically turn the light ON when the new bulb is installed even if the Z-wave module was turned OFF.
Restoring Factory Defaults
All Configuration Parameters can all be restored to their factory default settings by using your primary controller to reset the device.
Over-Current Protection
Over-current protection is provided by an internal fuse which is not user serviceable. Check your home’s circuit breakers before concluding that the product must be replaced.
Interoperability with Z-Wave™Devices
A Z-Wave™network can integrate devices of various classes, and these devices can be made by different manufacturers. Although every Z-Wave certified product is designed to work with all other Z-Wave certified products, your controller must include the appropriate device classifications in order to control non-lighting Z-wave devices. As an example, the 45600 basic remote is designed only for controlling Z-Wave
