control network with your primary controller.
-Refer to the instructions for your primary controller to access the network setup function and include or exclude devices.
-When prompted by your primary controller, tap the button.
-The primary controller should indicate that the action was successful. If the controller indicates the action was unsuccessful, please repeat the procedure.
-Once the module is part of the network, the same basic
procedure is used to add the module to groups or scenes. Refer to the primary controller’s instructions for details.
Please Note: After a power failure, the 45603 module returns to its last used ON/OFF state.
ADVANCED OPERATION
The following Advanced Operation parameters require that you have an advanced controller like the model 45601 LCD remote. Advanced remotes from other manufacturers may also be able to change these settings; however, basic remotes do not have this capability.
All On/All Off
Depending upon your primary controller, the 45603 module can be set to respond to ALL ON and ALL OFF commands in up to four different ways. Some controllers may not be able to change the response from its default setting. Please refer to your controller’s instructions for information on whether or not it supports the configuration function and if so, how to change this setting.
