Sony DHC-MD5 operating instructions Specifications, Troubleshooting

Troubleshooting (continued)

No Track

The inserted MD has a disc title but no tracks.

OVER

You have reached the end of the last track during high-speed search.

Protected

The inserted MD is protected against erasure.

Retry

The MD deck is redoing the recording because of vibrations or disc scratches encountered during recording.

Retry Error

Due to vibration affecting the deck or scratches on the MD, several recording attempts were made but with no success.

Smart Space

The signal was input again after silence continued for 3 to 30 seconds or less during digital recording.

Sorry

You tried to combine tracks that cannot be combined.

Specifications

Amplifier section

DIN power output	40 W + 40 W
	(6 ohms, at 1 kHz, DIN)
Continuous RMS power output
	50 + 50 watts
	(6 ohms at 1 kHz,
	10% THD)
Music power output	160 watts
Inputs	VIDEO/GAME IN
	(phono jacks)
	(switchable)
	VIDEO IN:
	voltage 250 mV,
	impedance 47 kilohms
	GAME IN:
	voltage 450 mV,
	impedance 47 kilohms
	TAPE IN (phono jacks):
	voltage 250 mV,
	impedance 47 kilohms
Outputs	TAPE OUT (phono jacks):
	voltage 250 mV
	impedance 1 kilohms
PHONES (stereo phone jack):
	accepts headphones of 8
	ohms or more.
SPEAKER:	accepts impedance of 6 to
	16 ohms.

CD player section

System	Compact disc and digital
	audio system
Laser	Semiconductor laser
	(λ=780nm)
	Emission duration:
	continuous
Laser output	Max. 44.6 µW*
	*This output is the value
	measured at a distance of
	200 mm from the
	objective lens surface on
	the Optical Pick-up Block
	with 7 mm aperture.
Frequency response	2 Hz – 20 kHz (±0.5 dB)

CD OPTICAL DIGITAL OUT

(Square optical connector jack, rear panel)

46

DHCMD5 3-858-047-12.EN (1)