The sound may drop-out while searching the edited tracks
Tracks created through editing may exhibit sound dropout during searching because
Track numbers cannot be marked
When “LEVELSYNC ON” (page 26) is displayed during analog recording, the track numbers may not be marked at the beginning of the track:
•if the input signal is below a certain fixed level for less than two seconds
•if the input signal is below a certain fixed level for more than two seconds in the middle of the track.
Guide to the Serial Copy
Management System
Digital audio components, such as CDs, MDs, and DATs let you copy music easily with high quality, for these digital products process music as a digital signal.
To protect the copyrighted music programs, this unit uses the Serial Copy Management System that allows you to make only a single copy of a recorded digital source through
You can make only a first generation copy* through a
For example:
1 You can make a copy of a commercially available digital sound programme (e.g., a CD and an MD), but you cannot make a second copy from the first- generation copy.
2 You can make a copy of a digital signal from a digitally recorded analog sound programme (e.g., an analog record and a music cassette tape) or from a digital satellite broadcast programme, but you cannot make a second copy.
*A
Notes
•This copy management system doesn’t apply when you make a recording through
•Since this unit supports 44.1 kHz sampling frequency only, you cannot make a digital recording of a digital satellite broadcast programme, whose sampling frequency is 32 kHz or 48 kHz. To make a digital recording, you need an MD deck or a DAT deck that supports these frequencies. You can also make a second- generation copy.
43
DHCMD5
