Sony DHC-MD5 Dividingrecorded tracks, Divide Function, While playing the MD, press ¸

Dividingrecorded tracks

— Divide Function

You can use this function to add track numbers to multiple tracks that are recorded as one track. This function also lets you mark track numbers after the recording ends. The total number of tracks increases by one and all the tracks following the divided ones are renumbered.

Example: Dividing track 2 into tracks B and C.

Track number

	1	2				3
Original
	A		B		C		D
tracks
					Divide	track 2 into
					tracks	B and C.
	1	2		3		4
DIVIDE	A		B		C		D

1 2 3,4

		¼	â
á	¸	¹	¤	¨
		¹

1 While playing the MD, press ¸.

The deck pauses.

2 Press EDIT/NO, then turn MULTI JOG until “Divide ?” appears.

3 Press ENTER/YES.

“Rehearsal” and “Position ok?” appear alternately and the portion to be divided is played repeatedly.

•To shift the position to be divided:

1 Press EDIT/NO.

2While monitoring the sound, turn MULTI JOG to the starting point to be divided.

You can check the display and shift the point between -128 and +127 (01 is about 0.06 seconds).

To cancel the divide function at this time, press ¹.

4 Press ENTER/YES again when you find the point to be divided.

“Complete” appears for a few seconds and the newly created track begins playing.

Tip

You can also divide tracks while recording. Press

rREC at the desired point.

Notes

•The new track will have no track title even if the original track was labelled.

•When “SHUFFLE” or “PROGRAM” appears in the display, press PLAY MODE repeatedly until the indication disappears.

30

DHCMD5 3-858-047-12.EN (1)