Sony DHC-MD5 operating instructions ProgrammingtheCD tracks, Programme Play

ProgrammingtheCD tracks

–– Programme Play

You can make a programme of up to

32 tracks from all the CDs in the order you want them to be played.

2 1	4 5
	¼	â
á ¸	¹	¤	¨

á ¸ ¹ ¤

7 ¹ 3

1 Press FUNCTION repeatedly until “CD” appears in the display, then place a CD on the disc tray.

2 Press PLAY MODE repeatedly until “PROGRAM” appears.

3 Press one of the DISC 1 – 3 buttons to select a CD.

4 Turn MULTI JOG until the desired track appears in the display.

Selected track Playing time

5 Press ENTER/YES.

The track is programmed. The last programmed track appears, followed by the total playing time.

6 To programme additional tracks, repeat steps 3 to 5.

Skip step 3 if you select a track from the same disc.

7 Press á.

All the tracks play in the order you selected.

To check the total number of the programmed tracks

Press DISPLAY in the stop mode.

“Step” appears, followed by the total number of the programmed tracks.

To	Press
Cancel	¹, then PLAY MODE
Programme	repeatedly so that
Play	“PROGRAM” disappears.
Add a track to	1 Select the disc tray with
the programme	DISC 1 – 3 buttons.
(in stop mode)	2 Select the track by turning
	MULTI JOG.
	3 Press ENTER/YES.
Clear the entire	¹ once in the stop mode.
programme

Tips

•To programme the entire CD as one step of the programme, skip step 4.

•The programme you made remains after the Programme Play has finished. To play the same programme again, press á. When you make a recording with the Hit Parade feature, the programme is erased.

•The total playing time is not displayed when you select a track whose number is 21 or over or, the total program time exceeds 100 minutes.

17

DHCMD5 3-858-047-12 (1)EN