Sony DHC-MD5 Markingtrack numbers, Marking track numbers at a specific point while recording

To stop recording

Press ¹on the MD deck.

When “Rec Level Over” appears

High level signal is input while recording. See “Troubleshooting” on page 45.

While “TOC” lights up or is flashing

Do not move the deck or pull out the mains lead to ensure the complete recording. The deck updates the Table of Contents (TOC) while “TOC” is flashing.

Note

If you pause recording during CD recording, a track number is recorded at that point. Also, note that the tracks are recorded as a single track with a single track number when:

•a single track of the same CD is recorded repeatedly.

•two or more tracks with the same track number from different CDs are recorded continuously.

Markingtrack numbers

When you record from this unit’s CD (digital recording), the track numbers are automatically marked. In addition, you can mark track numbers:

•At any point while recording.

•Automatically while analog recording.

Marking track numbers at a specific point while recording

You can mark track numbers at any time while recording, regardless of the type of sound source.

rREC

¼ â

á ¸ ¹ ¤ ¨

Press rREC while recording at the point you want to add a track mark.

The tracks following the added one are renumbered.

continued

25

DHCMD5 3-858-047-12.EN (1)