Basic Operation
The connected light can be turned ON in three ways:
1.With a Z-Wave remote
2.Manually with the push button on the Z-Wave module
3.By the Load-Sensing feature. Normally, the Z-Wave module controls the ON/Off state of the connected light and power is either turned On or Off at the module (either manually or by the remote). If the switch on the connected light is used, the Z-Wave control circuitry automatically senses that the light is being turned On and activates the Z-wave controlled outlet, providing power to the connected device. This feature is disabled by default; see the section on advanced operation for instructions on how to enable it.
Remote Control
GE Z-Wave remotes provide control of an Individual device, Groups of devices and Scenes. Other brands of Z-Wave Certified remotes may not offer as much flexibility in how you can set up your lighting control network. Please refer to your remote control’s instructions for details on its capabilities and instructions for adding and controlling devices.
Manual Control
The Front Panel Push button on the 45603 Appliance Module allows the user to:
1.Manually turn the connected equipment ON or OFF by pressing the button.
-This is a toggle switch; if the device is OFF, pressing the button turns the device ON and vice versa.
2.Include or exclude the module from the Z-Wave home
