Helpful Information

Light Bulb Replacement

Cooktop Light/ Night Light

Replace the burned-out bulb with a 120 volt,

40-watt incandescent bulb (WB36X10003), available from your GE supplier.

1To replace the bulb(s), first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

2Remove the screw at the left of the light cover and lower the cover.

3Be sure the bulb(s) to be replaced are cool before removing. After breaking the adhesive seal, remove the bulb by gently turning. Replace with the same size and type bulb.

4Replace the screw. Connect electrical power to the oven.

Remove screw

Oven Light

Replace the burned-out bulb with a 120 volt,

40-watt incandescent bulb (WB36X10003), available from your GE supplier.

38

1To replace the oven light, first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

2To remove the top grille, open the door and remove the 3 screws on top of the oven that hold the grille into place. Slide the grille to the left to remove it.

Screws

3Lift the metal tab on the light cover located above the handle.

4After breaking the adhesive seal, remove the bulb by gently turning. Replace with the same size and type bulb.

Filter housing

Light cover

5Replace the light cover.

6Replace the grille and screws. Connect electrical power to the oven.