GE 49-60456 About the shelves and bins, Instructions, Troubleshooting Tips, QuickSpace Shelf

Models: 200D8074P009 49-60456

1 132
Download 132 pages 14.7 Kb
Page 10
Image 10
Instructions

Instructions

About the shelves and bins.

Not all features are on all models.

Snugger About the shelves and bins.

Refrigerator Door Bins and Freezer Door Tilt-Out Bins

Installation Instructions Operating Instructions Safety

Refrigerator bin

Freezer tilt-out bin

Large Bins

The larger refrigerator door bins and freezer tilt-out door bins are adjustable.

To remove: Lift the front of the bin straight up, then lift up and out.

To replace or relocate: Engage the back side of the bin in the molded supports on the door. Then push down on the front of the bin. Bin will lock in place.

Small Bins

To remove: Lift the front of the bin straight up then out.

To replace: Position the bin above the rectangular molded supports on the door. Then slide the bin down onto the support to lock it in place.

The snugger helps prevent tipping, spilling or sliding of small items stored on the door shelf. Place a finger on either side of the snugger near the rear and move it back and forth to fit your needs.

Do not block

CAUTION:

Be careful when placing items in the top bin. Make sure that items do not block or fall into the ice chute.

Top freezer bin

 

CAUTION:

Do not block

Part must be in

place as shown

 

for proper ice

 

dispensing. Food

 

cannot be stored

 

in this location.

Top freezer bin (on some models)

Troubleshooting Tips

Press tab and pull shelf forward to remove

Slide-Out Spillproof Shelf

The slide-out spillproof shelf allows you to reach items stored behind others. The special edges are designed to help prevent spills from dripping to lower shelves.

To remove:

Slide the shelf out until it reaches the stop, then press down on the tab and slide the shelf straight out.

To replace or relocate:

Line the shelf up with the supports and slide it into place. The shelf can be repositioned when the door is at 90° or more. To reposition the shelf, slide the shelf past the stops and angle downward. Slide shelf down to the desired position, line up with the supports and slide into place.

Make sure you push the shelves all the way back in before you close the door.

Consumer Support

QuickSpaceShelf

This shelf splits in half and slides under

On some models, this shelf cannot be used

itself for storage of tall items on the shelf

in the lowest position.

below.

 

This shelf can be removed and replaced

 

or relocated just like Slide-Out Spillproof

 

Shelves.

 

10

Page 10
Image 10
GE 49-60456 About the shelves and bins, Instructions, Troubleshooting Tips, Slide-Out Spillproof Shelf, QuickSpace Shelf