Locked position

Unlocked position

Pull the hinge locks down to the unlocked position.

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket—it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Lift-Off Oven Door

The oven door is removable for easier access to the light bulb.

Do not lift the door by the handle.

To remove the door:

Fully open the door.

Each hinge has a hinge lock. Using a tool, pull the hinge locks down against the door frame.

Firmly grasp the door at the top sides.

Close the door to the stop position.

Lift the door up and pull straight out.

To replace the door:

Firmly grasp the door at the top sides. This is critical.

Approach the range with the door angled in a vertical position.

Guide the hinges into the slots.

Push door in firmly while opening.

Once in position, open the door completely. Push the hinge locks back in towards the front frame.

To clean the inside of the door:

■Because the area inside the gasket is cleaned during the self-clean cycle, you do not need to clean this by hand.

■The area outside the gasket and the door liner can be cleaned with a soap- filled steel wool or plastic pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

■Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door. Do not let water drip into the vent openings.

■If any stain on the door vent trim is persistent, use a soft abrasive cleaner and a sponge-scrubber for best results.

■Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

■Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Customer Service

19

Page 18 Page 20
Page 19
Image 19
GE 164D4290P007, 49-80038 Lift-Off Oven Door, To remove the door, To replace the door, To clean the inside of the door
Page 18 Page 20

164D4290P007, 49-80038 specifications

The GE 49-80038,164D4290P007 is an advanced circuit breaker designed for industrial applications, providing robust protection and control in electrical distribution systems. This model is engineered by General Electric, a leading name in the field of energy management and electrical solutions. It exemplifies innovation, reliability, and efficiency, tailored for demanding environments.

One of the standout features of the GE 49-80038 is its high breaking capacity, which allows it to interrupt fault currents effectively. This feature is crucial for ensuring the safety of electrical systems as it reduces the risk of equipment damage and fire hazards. The circuit breaker also offers a range of current ratings, allowing it to be used in diverse applications while ensuring optimal performance.

A notable technology integrated into the GE 49-80038 is its electronic trip system. This technology enhances the breaker's ability to detect overloads and short circuits, enabling precise trip settings and minimizing nuisance tripping. The electronic trip unit is customizable, allowing users to set the desired protection levels according to their specific needs, thus increasing operational flexibility.

In terms of design, the GE 49-80038 is built for easy installation and maintenance. Its compact form factor allows it to fit into standard electrical panels without requiring excessive modifications. Furthermore, the device includes features for remote monitoring and control, integrating seamlessly into modern smart grid applications.

Durability is another hallmark of this circuit breaker. Constructed from high-quality materials, the GE 49-80038 can withstand harsh environmental conditions, including high temperatures and humidity levels. This resilience ensures a long service life, reducing the frequency and costs associated with replacements.

Additionally, the circuit breaker complies with international standards, making it suitable for installation in various regions without the need for modifications. This compliance ensures reliability and performance across different electrical systems globally.

In summary, the GE 49-80038,164D4290P007 represents a cutting-edge solution for circuit protection in industrial settings, featuring high breaking capacity, an advanced electronic trip system, ease of installation, and unmatched durability. Its blend of innovative technologies and robust characteristics makes it a favorite choice for electrical professionals looking to enhance the safety and efficiency of their systems.
Top Page Image Contents