IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock, or to prevent property damage, personal injury, or loss of life.

WARNING ANTI-TIP DEVICE

All ranges can tip and injury could result.

To prevent accidental tipping of the range, attach it to the wall and floor by installing the Anti-Tip device supplied.

To check if the device is installed and engaged properly, remove the kick panel or storage drawer and inspect the rear leveling leg. Make sure it fits securely into the slot.

If you pull the range out from the wall for any reason, make sure the device is properly engaged when you push the range back against the wall. If it is not, there is a possible risk of the range tipping over and causing injury if you or a child stand, sit or lean on an open door.

Please refer to the Anti-Tip device information in this manual. Failure to take this precaution could result in tipping of the range and injury.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

The fiberglass insulation in self-clean ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure can be minimized by venting with an open window or using a ventilation fan or hood.

Fluorescent light bulbs contain mercury. If your model has a surface light, you must recycle the fluorescent light bulb according to local, state and federal codes.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■Be sure your appliance is properly installed and grounded by a qualified installer in accordance with the provided installation instructions.

■Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

■Do not attempt to repair or replace any part of your range unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

■Before performing any service, disconnect the range power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.

■Do not leave children alone—children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

■Do not allow anyone to climb, stand or hang on the door, storage drawer or cooktop. They could damage the range and even tip it over, causing severe personal injury.

3

Tips Customer Service

Page 2 Page 4
Page 3
Image 3
GE 164D4290P007, 49-80038 owner manual Tips Customer Service, All ranges can tip and injury could result
Page 2 Page 4

164D4290P007, 49-80038 specifications

The GE 49-80038,164D4290P007 is an advanced circuit breaker designed for industrial applications, providing robust protection and control in electrical distribution systems. This model is engineered by General Electric, a leading name in the field of energy management and electrical solutions. It exemplifies innovation, reliability, and efficiency, tailored for demanding environments.

One of the standout features of the GE 49-80038 is its high breaking capacity, which allows it to interrupt fault currents effectively. This feature is crucial for ensuring the safety of electrical systems as it reduces the risk of equipment damage and fire hazards. The circuit breaker also offers a range of current ratings, allowing it to be used in diverse applications while ensuring optimal performance.

A notable technology integrated into the GE 49-80038 is its electronic trip system. This technology enhances the breaker's ability to detect overloads and short circuits, enabling precise trip settings and minimizing nuisance tripping. The electronic trip unit is customizable, allowing users to set the desired protection levels according to their specific needs, thus increasing operational flexibility.

In terms of design, the GE 49-80038 is built for easy installation and maintenance. Its compact form factor allows it to fit into standard electrical panels without requiring excessive modifications. Furthermore, the device includes features for remote monitoring and control, integrating seamlessly into modern smart grid applications.

Durability is another hallmark of this circuit breaker. Constructed from high-quality materials, the GE 49-80038 can withstand harsh environmental conditions, including high temperatures and humidity levels. This resilience ensures a long service life, reducing the frequency and costs associated with replacements.

Additionally, the circuit breaker complies with international standards, making it suitable for installation in various regions without the need for modifications. This compliance ensures reliability and performance across different electrical systems globally.

In summary, the GE 49-80038,164D4290P007 represents a cutting-edge solution for circuit protection in industrial settings, featuring high breaking capacity, an advanced electronic trip system, ease of installation, and unmatched durability. Its blend of innovative technologies and robust characteristics makes it a favorite choice for electrical professionals looking to enhance the safety and efficiency of their systems.
Top Page Image Contents