GE 500A280P013 operating instructions Reversible Door Instructions, Tools Needed, Dryer Door

REVERSIBLE DOOR INSTRUCTIONS

These instructions are for changing the hinges from the	If you need to change the hinges from the left side to
right side to the left side.	the right side, follow these same instructions (merely
	reverse all references to the left and right).

Tools Needed

Standard #2 Phillips screwdriver

DRYER DOOR

1.Open the door and remove the filler plugs opposite the hinges.

(A tape-tipped putty knife or a needle-nosed plier will help to remove the plugs. Be careful not to damage the paint.)

2.With the door completely open, remove the bottom screw attaching each hinge to the dryer front. (Do not remove the screws located on the door itself).

3.Insert these screws about half way into the top holes, for each hinge, on the opposite side (where you removed the filler plugs).

4.Loosen the remaining top screw

from each hinge on the dryer front, half way.

5.With one hand holding the top of the door, and the other hand holding the bottom, remove the door from the dryer front by lifting it UP and OUT.

6.Rotate the door 180˚.

Insert it on the opposite door frame by moving the door IN and DOWN until the top hinge and the bottom hinge are resting on the top screws inserted in step 3.

7.With the other screws, secure each hinge at the bottom.

8. Tighten the top screws of each hinge.

9.Reinsert the plastic plugs on the side from which the door was removed.

Reversible Door Instructions

9