5
Auto StandbyIf you place the handset in the cradle while the handset is off the hook (during a call),
the call is automatically disconnected.
Ringer Volume (Shortcut)There are two ways to set the ringer volume. One is the traditional way as described in
the Programming Functions; Sound Setup; Ringer Volume menus. The other one is this
short cut to ringer menu.
1. Make sure the phone is OFF (not in TALK mode).
. Press the #pause/ringer button to display SET RINGER LEVEL 5.
. Use the caller ID-volume (
5 or 6
) button to scroll to your selection. LEVEL 5 is
the default setting.
. Press #pause/ringer button again to save and display the new selection for a few
seconds.
Flash/Call WaitingIf you subscribe to the combined Call Waiting Caller ID service from your local telephone
company, you will receive Caller ID information (if available) on Call Waiting calls. During
a phone call, you will hear a beep to indicate another call is waiting on the line and Caller
ID information for the waiting call shows on the handset display.
• To connect to the waiting call, press the ash button on the handset, and your
original call is put on hold.
• To switch between the two calls, press the ash button.