
Telephone Operation

Visual Indicators

Base

The charge/in use indicator on the base will ash to alert you to an incoming call,
during paging, or if you have a message waiting from your service provider. The
indicator will remain lit when a handset is in the base charging or when the line is in
use.

Handset

The TALK/SPEAKER indicator buttons ash when you receive a call and remain lit
during a call.
The keypad and CID will also light when a call is received.

VMWI / Visual Ringer Indicator on Handset

IMPORTANT: In order to use this unit’s Voice Mail Waiting Indicator
(VMWI) feature, you must subscribe to this service from your phone
company.
The VMWI indicator on the top of the handset ashes when you receive a new
message from your service provider. Also, it serves as a Visual Ringer function. It will
ash when there is an incoming call.

Speakerphone Operation

NOTE: If you are using the speakerphone, remain close to handset
so the party you are speaking to can hear you.
If you are using the earpiece and want to switch to the speakerphone, press the
TALK/SPEAKER button, press END button to end conversation.
If you are using the speakerphone and want to switch to the earpiece, press the
TALK/SPEAKER button again, press END button again to end conversation.