GE ABN12 operating instructions Read completelythenfollow ste~-by-ste~

Read completelythenfollow ste~-by-ste~

	1 Remove the front grille insert
	and the air filter.
	2 Remove the control knobs by
	pulling	straight off.
—	3 Remove	the 4 screws behind the
	air filter area that hold the front
	grille to the case. Remove the
	lower front screw at the bottom
	of the control panel. Save these
	screws. You will need them at the
	end of	the installation.
	4 Remove the 2 screws on the out-

5 Remove the piece of cardboard that protects the coils on the side of the unit.

side of the case that hold the case to the unit. Remove the air con- ditioner by grasping inside of the unit and pulling forward.

	1 Turn the case so that it’s open
	end is up. Apply one sill pad to
	each	side	of the bottom front
Sill pads	comer	of	the case.

2 Insert the right and left hand filler panels into the top and bottom rails. Secure them with six 1/4” screws, three on each side.

3 Peel the backing off the bottom window gasket and place onto the backside of the window stool.

J&J

,’: ...,, .,, ,..:,,.. 5=s. . . . . ,,, ....-.

10