,
Center the case in the window. Lower the window until it touches
behind the air conditioner
top rail. Make sure the bottom rail is behind the window stool.
4 Attach the support brackets to the bottom of the case with 1/2” screws, 2 on each side.
2 Locate the 3 holes that are on the plate at the front of the case. Drill 1/8” pilot holes. Using 3 1“ screws attach the case to the
window stool.
3 Assemble the 2 leveling bolts
and nuts to the support brackets.
5 On the outside, turn the leveling bolts until each one makes contact with the wall. Make sure the back of the case tilts 1/4” to 3/8” lower than the front. Tighten the nuts.
ACAUTION:
●Use a wood block between the leve/ing bolts and the wall if the outside wall is weak or if the weight of the air conditioner falls between the studs in the wall.
11