Installation Instructions

3PREPARE THE AIR CONDITIONER (cont.)

CAttach the accordion panels to the case using 3 Type A screws on each side.

Top mounting rail

Accordion panel

Type A screws

BACK

Bottom mounting rail

4PREPARE THE WINDOW

Cut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash.

5INSTALL THE AIR CONDITIONER IN THE WINDOW

APlace the air conditioner on the stool with the bottom mounting rail against its back edge. Center it and close the window securely behind the top mounting rail.

It should be level or slightly tilted to the outside. Use a level; about a 1/3 bubble will be the correct case slant to the outside.

or

or

 

Type C screws

BExtend the left and right accordion panels to the vertical window sashes and attach, through the holes in the panels, with 4 Type C screws, as appropriate.

6INSTALL A SUPPORT BRACKET AND THE FOAM TOP WINDOW GASKET

AAttach the support bracket with one Type C screw.

BCut the foam top window gasket to the window width.

CStuff the foam between the glass and the window to prevent air and insects from getting into the room.

11

Page 11
Image 11
GE AEW05, AET05, AEW08, AEW06 installation instructions Prepare the Window, Install the AIR Conditioner in the Window