7
Install the Window Locking Bracket and the Foam Top Window Gasket
| Attach the window locking bracket with a |
| Cut the foam top window gasket to the window |
A | B | ||
| type C screw. |
| width. |
|
| ||
|
|
| Stuff the foam between the glass and the |
|
| C | |
|
|
| window to prevent air and insects from getting |
|
|
| |
|
|
| into the room. |
Safety Instructions Operating Instructions
8
Install the Air Conditioner in the Case
ASlide the air conditioner into the case. Reinstall the 2 screws removed earlier on each side of the case.
BBefore installing the front grille, pull out the vent control lever located above the unit control knobs, as shown.
C
Attach the front grille to the case by inserting the tabs on the grille into the slots on the front of the case. Push the grille in until it snaps into place.
Installation Instructions Troubleshooting
Guide the lever carefully through the grille as you push it in.
DLift the inlet grille and secure the front frame with a type A screw. Lower the inlet grille into place.
13
Tips
Customer Service