![Instructions](/images/new-backgrounds/36156/3615623x1.webp)
Instructions
Installing a
Care and Cleaning Operating Instructions Safety
Read these instructions completely and carefully.
Install the Air Conditioner in the Case.
ARemove the locking plate on the front left side.
Locking
plate
Remove
screw
BRemove the shipping pad inside the air conditioner next to the compressor.
DReinstall the locking plate with the tab behind the wall case flange. Tighten the screw.
EAttach the power cord to the base pan with the clamp.
Base pan
Power cord
Clamp
FWhen the wall outlet is to the left, extend the cord under the unit and hold it in place with the clamp.
Consumer Support Troubleshooting Tips Installation Instructions
C
Remove shipping pad
Carefully slide the air conditioner back into the case. Make sure that the tubing on the unit does not touch the wall case and that the case installation is secure.
Power cord
Clamp
GAttach the front grille. An opening for the power cord is on the bottom of the front grille.
12