Read completely, then follow step-by-step.
1 | Window Requirements |
■These instructions are for a standard double- | |
hung window. You will need to modify them for |
other types of windows.
■The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions to the right.
■All supporting parts must be secured to firm wood, masonry or metal.
■The electrical outlet must be within reach of the power cord.
16″ min.
2513⁄16″ to 42″
(With accordion panels)
221⁄16″ min.
(Without accordion panels)
Window opening dimensions are for a standard
Safety Instructions Operating Instructions
2 | Storm Window Requirements | ||||||||||||||||
A storm window frame will not allow the air | |||||||||||||||||
conditioner to tilt towards the outside and will keep | |||||||||||||||||
| it from draining properly. To adjust for this, attach a | ||||||||||||||||
| piece of wood to the stool. | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Wood |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1/2″ higher |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
| than frame |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| Stool |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Storm window |
|
|
|
| |||||||||||
|
| frame |
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WIDTH: 2″
LENGTH: Long enough to fit inside the window frame.
THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame.
Attach securely with nails or screws provided by the installer.
Installation Instructions Troubleshooting
3 | Front Grille |
To remove the front grille: |
ARemove the shipping tape (if present). Remove the knobs from the control panel.
BRemove the 2 screws that hold the grille in place. If this is the first time the grille is being removed, the screws will not be in place. They are packed in a separate plastic bag.
CAt the bottom right side of the grille, press inward on the case near the power cord. Pull outward to the right on the grille until the tab releases.
DOn the bottom left side, push inward on the case and pull outward to the left to release the tab. Pull the grille toward you and lift up.
Remove the 2 screws.
9
Tips
Customer Service
