6
7
Install the Panels
| Slide the left and right accordion panels into |
| Insert a panel retainer in the first fold of each |
A | B | ||
| the top mounting rail. |
| panel and attach them to the case with 2 type |
|
| ||
|
|
| C screws on each side. |
Top mounting rail
Type C screws
Panel retainer
Panel retainer
Type C screws
Install the Case in the Window
A | Cut the window sash sealing ribbon to the |
| D | Extend the left and right accordion panels to |
| window width and stick the adhesive side to the |
|
| the vertical window sashes and attach with 2 |
| bottom of the sash. |
|
| type A screws. |
B | Measure and mark the centerline on the |
| E | Attach the top mounting rail into the window |
| window sill. |
|
| sash with 2 type B screws. Secure the case to the |
|
|
|
| window stool with 2 type A screws. |
| Sealing ribbon |
|
|
|
| Type A screw |
| ||
|
|
|
| Type A screw |
|
| Type B |
| |
|
| screws |
| |
|
|
|
| Type A screws |
| Mark centerline |
| NOTE: Drill pilot holes before attaching the screws. | |
C | Install the case into the opening and center on |
| ||
| F | Seal small openings around the case with the | ||
| the line marked. Lower the window behind the |
| ||
| top mounting rail. The case should be installed |
| putty provided. | |
level or with a slight tilt toward the outside.
11
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips
Customer Service
