SafetyInstructions, TroubleshootingTips Installation

SafetyInstructions

Window Installation Instructions

Install the Window Filler Panels and Locking Bracket

7		Insert the cut edge of the filler panel into the		Use upholstery tacks to attach the filler panel
	A		D
		case side seal groove.		to the face of the window molding through the

holes provided.

Case

Leave a small space at the bottom

of the case side seal groove.

Instructions OperatingInstructions

BPush the filler panel backward toward the window frame until it clears the window stool.

CSlide the filler panel out from the air conditioner case. Make sure it contacts the window molding.

Case

Window molding

Slide the filler panel into place.

EPull the sliders out until they contact the face of the window molding.

FPull the window down tightly and lock it in place with 5/8″ screws.

Attach

Attach through the holes on each side of the window sash

CustomerService

	Attach the window locking bracket with
G
	a 5/8″ screw.

Install the Window Gasket and Replace the Air Conditioner

8		Cut the foam top window gasket to the window		Slide the air conditioner into the case and
	A	Cut the foam top window gasket to the window	B	Slide the air conditioner into the case and
	A	width. Stuff the foam between the glass and the	B	replace the front grille. Install the two
		width. Stuff the foam between the glass and the		replace the front grille. Install the two
		window to prevent air and insects from getting		ground/anti-theft screws removed at the
		into the room.		beginning of the installation.

		Make sure the unit is OFF before inserting
	C	Make sure the unit is OFF before inserting
		cord plug into the outlet.
		cord plug into the outlet.
		Check all seals and plug any remaining air gaps
	D	Check all seals and plug any remaining air gaps
12		with a suitable weatherproof caulk.
		with a suitable weatherproof caulk.