![](/images/new-backgrounds/1076115/7611513x1.webp)
Installation Instructions
STEP 6 POSITION WATER LINE AND HOUSE WIRING
•Position water supply line and house wiring on the floor of the opening to avoid interference with base of dishwasher and components under dishwasher.
STEP 8 SLIDE DISHWASHER PARTIALLY INTO CABINET
DO NOT PUSH AGAINST FRONT PANEL WITH KNEES. DAMAGE WILL OCCUR
• Slide dishwasher into the opening a few inches at a time.
4"
6"
House
WaterLine Wiring
Figure M
STEP 7 INSTALL DRAIN HOSE THROUGH CABINET
•Stand the dishwasher upright and position in front of the opening. Insert drain hose into cabinet wall hole. If a power cord is used, guide the end through a separate hole.
| Maximum |
| Drain Hose |
Insulation | Length 10” |
| |
Blanket | Water |
| Line |
| Drain |
| Hose |
| House |
| Wiring |
| Power Cord |
| (If Used) |
Figure N |
|
TIP: Position water line and house wiring on the floor to avoid interference with base of dishwasher.
Do Not Push Against
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
Figure O
•As you proceed, pull the drain hose through the opening under the sink. Stop pushing when the dishwasher is a few inches forward of adjacent cabinetry.
•Make sure drain hose is not kinked under the dishwasher and there is no interference with the water line and wiring or any other component.
7