AT-GS900/16, AT-GS900/24 Fanless Gigabit Ethernet Switches Installation Guide
Planning the Installation
Table 3 contains the cabling specifications for the twisted pair ports.
Table 3. Twisted Pair Cabling and Distances
Speed | Type of Cable | Maximum |
Operating |
| | Distance |
| | |
10 Mbps | Category 3 or better 100-ohm | 100 m (328 ft) |
| shielded or unshielded twisted pair | |
| cable | |
| | |
100 Mbps | Category 5 or Category 5E | 100 m (328 ft) |
| (Enhanced) 100-ohm shielded or | |
| unshielded twisted pair cable | |
| | |
1000 Mbps | Category 5 and Category 5E | 100 m (328 ft) |
| (Enhanced) 100-ohm shielded or | |
| unshielded twisted pair cable | |
| | |
Note
The twisted pair ports on the switch feature Auto-MDI when operating at either 10, 100, or 1000 Mbps. Each port is individually configured as MDI or MDI-X when connected to an end-node. Consequently, you can use either a straight-through or crossover twisted pair cable when connecting any network device to a twisted pair port on the switch. For example, a port operating at 10 or 100 Mbps uses two pairs of twisted pair wiring while a port operating at 1000 Mbps uses four pairs of twisted pair wiring.
