ge.com

 

Oven Racks and Drawer Racks

 

 

 

 

Clean the racks with an abrasive cleanser.

To make the racks slide more easily, apply

 

The oven racks may be cleaned in the

a small amount of vegetable oil or cooking

 

 

oil to a paper towel and wipe the edges

 

self-cleaning oven. However, the racks

 

of the oven racks with the paper towel.

 

will darken in color, lose their luster and

 

 

 

become hard to slide if cleaned during

 

 

the self-cleaning cycle.

 

Safety Instructions

 

Wire cover holder.

Oven Light Replacement

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb cool completely.

The oven light bulb is covered with a removable glass cover that is held in place with a bail-shaped wire. Remove the oven door, if desired, to reach cover easily.

To remove:

Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.

Do not remove any screws to remove the cover.

Do not touch hot bulb with a wet cloth. Replace bulb with a 40-watt household appliance bulb.

To replace cover:

Place it into the groove of the light receptacle. Pull the wire forward to the center of the cover until it snaps into place. When in place, the wire holds the cover firmly. Be certain the wire is in the depression in the center of the cover.

Connect electrical power to the range.

Instructions

Operating

 

Care and Cleaning

 

 

Instructions

Installation

 

 

Tips

Troubleshooting

 

 

37

Consumer Support

Page 37
Image 37
GE CS980 Oven Racks and Drawer Racks, Oven Light Replacement, To remove, Do not remove any screws to remove the cover