0150-0238A 5-1 Calibur DSR-1000eZ
5 INSTALLER PROGRAMMING For security reasons, a password is provided to limit access to the Advanced menu. For instructions
about entering the Advanced menu, see section 4.7 Main Menu → Advanced Menu, on page 4-13.
5.1 Advanced Menu → Disk Overwrite Mode
Disk Overwrite Mode
Select Mode
Continuous Overwrite
Use this menu to specify how the unit will handle disk overwrite
issues once the hard disk becomes full.
The unit handles disk overwrite issues in three ways:
• No Overwrite.
• Overwrite Once.
• Continuous Overwrite.
o Advanced Menu → Disk Overwrite Mode → No Overwrite
Physical Start
and End of Disk
Unit Stops
Recording when this
point is reached
Previously
recorded data
Previously
recorded data
New recorded
data
Functions of No Overwrite mode:
• Recording always starts at end of
last recording.
• Recording stops when end of disk is
reached (when disk is full).
• When the end of the disk is reached,
the unit displays an on-screen
message indicating that the disk is
full, and the unit has stopped
recording. User must acknowledge
the on-screen message by pressing
the Enter button.
• Unit will not record over previously
recorded data. To continue
recording, the data must be erased
(or deleted) in the Advanced →
Disk Maintenance menu. No Overwrite Mode