Calibur DSR-1000eZ 1-2 0150-0238A
1.4 Installation Environment Power: Ensure that the site's AC power is stable and within the rated voltage of the external power
supply. If the site's AC power is likely to have spikes or power dips, use power line conditioning or an
Uninterruptable Power Supply (UPS).
Ventilation: Install the unit in a well-ventilated area. Take note of the locations of the cooling vents in
the unit's enclosure, and ensure that they are not obstructed.
Temperature: Observe the unit's ambient temperature specifications when choosing a location
space. Extremes of heat or cold beyond the specified operating temperature limits may cause the unit
to fail. Do not install the unit on top of other hot equipment.
Moisture: Do not expose the unit to rain or moisture. Moisture can damage the internal components.
Do not install this unit near sources of water.
Chassis: You can place other equipment on top of the unit if it weighs less than 35 pounds.
1.5 Passwords Figure 1-1 Passwords
Password Name Function Changeable by user? Password
Advanced Menu
Password
Provides access to the
Advances menu for the
installer. Yes: See page 5-8 3 4 7 7
Factory Password Restores the unit to the
factory defaults. No 8 1 1 1
A password is provided to limit access to the Advanced menu. It is recommended that the default
password be changed after installation is complete. As a security measure, store the password in the
administrator's secured files or in a limited access area. For instructions on entering the Advanced
menu with the password see section 4.7 Main Menu → Advanced Menu on page 4-13.
A password is also provided to return the unit to the factory defaults. For instructions on returning the
unit to the factory defaults, see section 5.8 Advanced Menu → Factory Settings on page 5-8.
1.6 Front Panel Controls Figure 1-2 Front Panel
1 2 4 5 63
7
8
9
10
1. Record button: Press this button to begin recording.