GE RGB744, EGR2000, LGB356 manual Before You Call for Service

PROBLEM		POSSIBLE CAUSE
CLOCK AND TIMER		• Range electrical plug must be securely seated in a live power outlet. Check for
DO NOT WORK		blown fuse or tripped circuit breaker.
		• Check for power outage.
		• Review the Oven Control, Clock and Timer section of this guide.
“F—AND A NUMBER”	• If the time display flashes “F—and a number,” you have a function error code.
FLASH IN THE DISPLAY		If a function error code appears during the self-cleaning cycle, check the oven
		door latch. The latch may have been moved, even if only slightly, from the
		latched position. Make sure the latch is moved to the right as far as it will go.
		Turn the Oven Set knob to off. Allow the oven to cool for one hour.
		Put the oven back into operation.
		• Disconnect all power to the range for 5 minutes and then reconnect power.
		If the failure code repeats, then call for service.
THE DISPLAY GOES		• Disconnect power to the range at the fuse box or circuit breaker for at least
BLANK OR INDICATOR		10 seconds. Turn power on and power up your range. If the indicator lights are
LIGHTS COME ON		still on, call for service.
WHEN THE RANGE IS
NOT IN USE
CLEAN LIGHT FLASHES		• The Oven Set knob is set at CLEAN before the door latch handle is
		moved to the right.
OVEN LIGHT DOES NOT		• Bulb may be loose or burned out.
COME ON		• Electrical plug must be plugged into a live power outlet.
OVEN WILL NOT WORK		• Plug on the range is not completely inserted in the electrical outlet.
		• The circuit breaker in your house has been tripped, or a fuse has been blown.
		• Oven controls not properly set.
OVEN TEMPERATURE		• The Oven Set knob needs adjustment. See the Adjust the Oven
TOO HOT OR TOO COLD		Thermostat— Do It Yourself section.
FOOD DOES NOT ROAST		• Oven controls not properly set. See the Baking or Roasting section.
OR BAKE PROPERLY		• Shelf position is not correct.
		• Incorrect cookware or cookware of improper size is being used.
		• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
		Do It Yourself section.
		• Clock not set correctly.
		• Aluminum foil used improperly in the oven.
		• Oven bottom not securely seated in position.
		(continued next page)

47

Before You Call for Service