Press key to end the call.

On hook dialing

Dial the telephone number (delete any incorrect entries by pressing “C” key).

Press key to carry out the conversation.

Press key to end the call.

VMWI/LED

The VMWI/LED in the handset will flash when there are new voice

message calls received. Icon turns on and the LCD display “Message” in the call log memory.

This service need subscription to local operator and it supports the FSK CLI system only.

Taking Calls

When an external call is received, all registered handsets and the base station ring. EXT flashes in the handset display and, if configured, the telephone number of the caller appears (network depended). If the caller has been entered in your phone book, the name appears. The incoming call VMWI/LED on the base station flashes. In the case of an internal call or on pressing the paging key on the base station, INT flashes in the handset display.

Handset is in the base station

Take the handset from the base station; a connection is automatically established (when the AUTO ANS function is

active). Otherwise, press key. Carry out the conversation.

Press key to end the call.

Handset is not in the base station

Press key. Carry out the conversation.

Press key to end the call.

Redialing

The phone stores the last five numbers dialled in the redial memory

Press key; the last call number dialed is displayed. Press

or key to search the required number in the redial memory list.

Press key to carry out the conversation.

Press key to end the call.

Dialing from the Phone Book

Press key; the first entry in the phone book appears. (Or “MEM EMPTY” if no entry)

Press or key to select the required subscriber from the phone book. Alternatively, enter the first letter of the name required.

Press

key. The number is dialed. Carry out the

conversation.

 

Note: How to store entries in the phone book is explained in the Chapter “Phone Book”.

Call Log Operations

IMPORTANT: To use the “Call Log” function, you must subscribe to your network operator’s Caller Line Identification (CLI) service.

Browse, Call Back, Delete, Save

If calls have been received in your absence, these are stored in the CALL LOG memory when your telephone service has enabled this function. The number of calls appears in the display. Incoming calls are also indicated in the display for 10 seconds during a call.

Press key as often as necessary until CALL LOG menu

appears. Alternatively, press and hold “*” key. Then press “INT/OK” key.

8

Page 8
Image 8
GE FS21828 manual Taking Calls, Redialing, Dialing from the Phone Book, Call Log Operations