ge.com
Safety
Plastic Hinge Cover
To Remove the Freezer Door (on Non-Electronic Control Upright models)
Hinge
Screws
Top Hinge
(on some models)
1
2
3
4
Remove the plastic hinge cover by either lifting it off or folding it back (depending on model).
Remove the screws holding the hinge to the top of the cabinet using a screwdriver, 5/16″ socket driver or wrench (depending on model).
Remove the top hinge from the cabinet and lift the door up and off the lower hinge pin. Set the door aside.
Remove the two screws from the bottom hinge.
To replace the doors, reverse the order of the above instructions.
CAUTION: It is very important that all hinge screws are securely tightened to ensure a secure assembly and prevent hinge slippage.
To Remove the Freezer Door (on Electronic Control Upright models)
The hinge screws are tamperproof. Please have an authorized service technician remove the door.
Lid Removal (on Chest models)
See lid removal instructions on either the back of the cabinet or the hinge label.
11
Instructions Operating Instructions
Instructions | Installation |
Troubleshooting Tips Consumer Support
