Installing the water heater.

The location chosen for the water heater must take into consideration the following:

Safety

Local Installation Regulations

The installation of this water heater must be in accordance with the Manufactured Home Construction and Safety Standard (Title 24, CFR; Part 3280) and the following instructions; and local codes governing the installation of water heaters in manufactured homes (mobile homes).

If additional wiring information is desired, the latest edition of the National Electrical Code is recommended. It is available from some local libraries or can be purchased from the National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269 as booklet ANSI/NFPA 70.

Instructions Installation

Location

Locate the water heater in a clean dry area as near as practical to the area of greatest heated water demand. Long uninsulated hot water lines can waste energy and water.

Place the water heater in such a manner that the thermostat and element access panels can be removed to permit inspection and servicing such as removal of elements or checking controls.

The water heater and water lines should be protected from freezing temperatures. Do not install the water heater in outdoor, unprotected areas.

CAUTION: The water heater should not be located in an area where leakage of the tank or connections will result in damage to the area adjacent to it or to lower floors of the structure. Where such areas cannot be avoided, it is recommended that a suitable catch pan, adequately drained, be installed under the water heater.

Instructions Operating Instructions Care and Cleaning

B

A—Diameter of water heater plus 2min.

To open drain, line

B—Maximum 2

A

should be at least 3/4

ID and pitched for proper drainage.

NOTICE: Auxiliary catch pan MUST conform to local codes.

Catch Pan Kits are available from the store where the water heater was purchased, or any water heater distributor.

Inspect Shipment

Inspect the water heater for possible damage. Check the markings on the rating plate of the water heater to be certain the power supply corresponds to the water heater requirements.

Troubleshooting Tips Customer Service

5

Page 5
Image 5
GE AP12170-4, GE30T06MAG Installing the water heater, Local Installation Regulations, Location, Inspect Shipment

GE30T06MAG, AP12170-4 specifications

The GE AP12170-4, also known as the GE30T06MAG, is a cutting-edge product designed to enhance efficiency and reliability in various industrial applications. This model has garnered attention due to its advanced features, robust technologies, and overall performance characteristics.

One of the standout features of the GE AP12170-4 is its high power capacity, which enables it to handle demanding loads in large industrial environments. The device is engineered to maintain continuous operation even under extreme conditions, making it ideal for critical infrastructures where downtime is not an option. Its durable construction is designed to withstand harsh environmental factors, ensuring longevity and consistent performance.

In terms of technology, the GE AP12170-4 integrates state-of-the-art control systems that facilitate precise monitoring and management of electrical loads. This technology allows users to optimize energy consumption while simultaneously safeguarding against overloads. The built-in diagnostics and data logging capabilities provide real-time insights into operational efficiency and can be crucial for predictive maintenance, reducing unexpected failures and operational costs.

Additionally, this model features advanced safety mechanisms, including surge protection and fault detection systems, which are essential for minimizing risks associated with electrical surges and other anomalies. This focus on safety extends to user-friendly interfaces, which simplify the operation and maintenance of the device. Operators can easily navigate through settings and troubleshoot potential issues, enhancing overall usability.

The GE AP12170-4 also incorporates flexible connectivity options, allowing it to integrate seamlessly into existing systems. Whether using legacy communication protocols or modern networks, users can enjoy versatile connectivity that enhances interoperability with other industrial equipment. This adaptability is vital for facilities undergoing digital transformation and seeking to improve operational efficiency.

Moreover, the design of the GE AP12170-4 emphasizes energy efficiency, contributing to lower operational costs and reduced environmental impact. By optimizing performance and reducing energy waste, it aligns with the growing demand for sustainable practices in industrial operations.

Overall, the GE AP12170-4, or GE30T06MAG, represents a blend of power, reliability, and advanced technology. Its comprehensive features equip industries to meet the challenges of modern operations while prioritizing safety, efficiency, and sustainability. Whether in manufacturing, utility, or larger infrastructure projects, this model stands out as a versatile solution for meeting the demands of today’s industrial landscape.