1-10 VersaMax Serial to Ethernet Adapter User's Manual – July 2000 GFK-1852
1
Configuration Example
The following figure shows the results of pressing the 2 key to select the “CH1 Serial
and Protocol Sett ings” parameter group.
Notice that the first parameter in the group (“Protocol Mode”) is di s played. The
current value is shown in parentheses (001 in this example) before the prompt.
Simply pressing the Enter key would retain the current parameter value; typing 2 and
pressing the Enter key would set the Protocol Mode parameter to Mode #2.
Figure 1-10. Configuring the “Protocol Mode”
After each parameter value has been entered, the next parameter in order will appear
at the prompt, as sh own in the followin g figure:
Figure 1-11. Continuing Configuration of the “CH1 Serial & Protocol Settings”
P
arameter Prompt