Serial Line Interfaces

6

Using the VMSE on an RS-422/485 Multidrop Network

The following figure shows an acceptable configuration for a multidrop network. This example shows only two slave devices; if additional slaves were added, termination would be required at the last slave device instead of at Slave #2.

Master

Slave #1

Slave #2

Serial Switch=**

VMSE #1

Ethernet Cable

 

Serial

Switch=RS-422

Line 2

VMSE #2

Termination is required across RD or RX terminals at these locations if the serial line is greater than 6 feet (2 meters) long

VMSE #1 must be set to the configuration (RS-232 or RS-422) that matches the Master

Figure 6-14. Using the VMSE in a Multidrop Arrangement

Multidrop Application Notes

Any serial line longer than 6 feet (2 meters) must have a termination resistor across its receive terminals (RD or RX) at the end of each receive line.

The serial port on the VMSE #2 screw terminals must be used since it is the only VMSE port that supports RS-422. The VMSE’s RJ-45 Serial port cannot be used since it is an RS-232 port only, and RS-232 does not support multidrop.

The switch on the front of the VMSE #2 must be set to RS-422 position to enable RS-422 on the VMSE screw terminals. Also, the “Interface Type” configuration parameter must be set to RS-422 (no other setting is acceptable).

Serial Line 1 may be RS-232 or RS-422 as long as both Master and VMSE #1 are configured accordingly.

For Serial Line 2, which must be an RS-422 line, match the specifications and basic wiring scheme for User-Built Cable #4. All multidrop connections must be made at the nodes inside the connectors (thus, each connector terminal would have two wires attached), in a parallel “daisy-chain” style. No line stubs or intermediate terminal blocks are permitted.

Each serial cable’s shield must be grounded at one end of the cable only.

The VMSE can be the only device connected to the master on Serial Line 1 shown in Figure 6-14 above.

GFK-1852

Chapter 6 Serial Line Interfaces

6-9

Page 56
Image 56
GE GFK-1852 user manual Using the Vmse on an RS-422/485 Multidrop Network, Multidrop Application Notes

GFK-1852 specifications

The GE GFK-1852 is an advanced communication and control processor designed for industrial automation solutions. It serves as a critical component in the realm of programmable logic controllers (PLCs) and offers robust features that enhance operational efficiency across various sectors.

One of the standout features of the GE GFK-1852 is its support for multiple communication protocols. This flexibility allows it to connect seamlessly with various devices and systems, making it an excellent choice for complex industrial environments. The GFK-1852 is compatible with Ethernet/IP, Modbus TCP/IP, and other industrial communication standards, facilitating integration with a wide range of equipment and network configurations.

Another significant aspect of the GE GFK-1852 is its high processing speed and performance. Equipped with a powerful processor, it can handle extensive data processing needs, ensuring real-time response and minimal latency. The device supports multiple I/O configuration options, which can be tailored to meet the specific requirements of a given application. This adaptability makes it suitable for both small-scale and large-scale operations.

The inclusion of built-in security features is also noteworthy. The GE GFK-1852 comes with various encryption protocols and user authentication mechanisms to safeguard against unauthorized access and cyber threats. This aspect is increasingly important in today’s interconnected industrial landscape where security vulnerabilities can lead to significant operational disruptions.

Additionally, the GE GFK-1852 offers sophisticated diagnostic and monitoring capabilities. Users can gain valuable insights into operational performance through real-time data analytics and logging features. This empowers maintenance teams to address potential issues proactively, ultimately improving uptime and reducing maintenance costs.

Another key characteristic is its user-friendly interface. The GFK-1852 is designed with ease of use in mind, enabling operators to configure and manage the device with minimal training. Programmed through intuitive software tools, it simplifies complex tasks and enhances user productivity.

In conclusion, the GE GFK-1852 stands out as a versatile and high-performance communication processor ideal for diverse industrial applications. Its support for multiple communication protocols, high-speed processing, built-in security, and user-friendly design make it a top choice for businesses looking to optimize their automation systems. By leveraging the capabilities of the GFK-1852, organizations can seamlessly integrate their operations, enhance productivity, and ensure a secure industrial environment.