Installation Instructions
4ELECTRICAL CONNECTION INFORMATION
WARNING – To reduce the risk of fire, electrical shock and personal injury:
The water heater must be electrically grounded in accordance with local codes and ordinances or, in the absence of local codes, in accordance with the NATIONAL ELECTRICAL CODE, ANSI/NFPA NO. 70, or the CANADIAN ELECTRICAL CODE, CSA C22.1.
ELECTRICAL REQUIREMENTS
This appliance must be supplied with 120V, 60Hz, and connected to a properly grounded branch circuit, protected by a 15- or
If electrical supply provided does not meet the above specifications, it is recommended that a licensed electrician install an approved outlet.
Inside unit
Wire nuts
PCB
120VAC CONNECTION WIRES
GROUND
TERMINAL
Outside unit | Electrical |
| connection |
Electrical disconnect switch
16