GE GSD3400, GSD3600, GSD3700, GSD3900 Control Settings, Energy Options, Start, Safety Information

Control Settings

1 Cycles

POTS & PANS For heavily soiled dishes or cookware with dried-on

or or baked-on soils. Everyday dishes may be included. HEAVY WASH This cycle will not remove burned-on foods.

HOT START Preheats wash water to correct temperature.

NORMAL WASH For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have lighter soil than normal. Choosing a cycle other than NORMAL WASH will save energy and water.

LIGHT WASH For dishes with light soils.CHINA CRYSTAL For lightly soiled china and crystal.

SHORT WASH For quickly washing loads of everyday dishes with medium soils that have not dried on, such as loads consisting mostly of glasses.

RINSE ONLY For rinsing partial loads that will be washed later. Do not use detergent.

PLATE WARMER For warming clean dishes and serving plates. This cycle will take approximately 32 minutes.

Safety Information

Operating Instructions

2

Energy Options

HI TEMP Provides extra heat for best performance. It is used WASH best with heavily-soiled dishes.

HI TEMP RINSE Turns on the heater in final rinse cycles to help prevent spotting on dishware. This option may be turned ON or OFF during the wash cycle.

HEATED DRY ON/ Turns the drying heater on for fast drying. This HEATED DRY cycle will extend the time to your wash cycle.

Troubleshooting Tips

3

Start

■ Make sure the Dial is at an OFF position.

■ Select the desired Cycle and Options. Indicators will show selections.

■ Turn the Dial to the desired Cycle. Don’t turn it past the Selected Cycle position, or you could accidentally miss a rinse.

■ Latch the door. Cycle On lights up. There is a time delay between start-up and water fill so you will not hear any wash action right away.

Customer Service

9