HOW TO OPERATE YOUR DIS~ASHER
I\
I
I
STEP 1. Load your dishwasher with dishes, silverware, pots, pans, bowls, etc., according to the Loading section.
STEP 2. Add detergent to the detergent dispenser. Make sure the Cycle Indicator Dial is at 0~ position before adding detergent. (See Detergent Guide).
Use rinse aid agent to help prevent spotting. Occasionally check to insure that rinse agent container is at least hdf full. (See How to Use a Rinse Agent section).
STEP 3. Select drying option.
HEATED DRY. Turns the drying heater on for fast drying.
NO HEAT DRY. Turns the drying heater off to save energy. The dishes will dry naturally over a longer period such as overnight.
If you need your dishes sooner, open the dishwasher door after the cycle is complete to reduce the natural drying time.
Use of this option reduces the electrical energy used by this model approximately 10%.
STEP 4. Select the wash cycle and start the dishwasher. (See Cycle Selection Hint~.
If your dishwasher drains into a food waste disposer, operate the disposer until it is empty before starting the dishwasher.
To obtain the benefits of a complete cycle, be careful that you do not turn the dial any farther than necessary to start the dishwasher.
●For NORMAL WASH cycle: I
a Latch the door. | 0: ;AM | |
t | ||
b. Slowly turn Cycle Indicator | ||
DRVING | ||
Dial to START position to | ||
| ||
start the cycle. You will hear | @WASHING | |
the motor start. There is a time | ||
|
delay between the
not hear any wash action right away.
c. Latch door to stirt the cycle.
4
