Installation Instructions
6
INSTALL CENTER HINGE
ON THE LEFT
Remove the three plug buttons on the left side and install them on the right. Remove the mullion screw on the left side with a Phillips screwdriver and install on the right.
Install the center hinge on the left side with the screws, spacer and washer(s) (on some models) that you removed in Step 2.
Remove the tape holding the door shut.
CAUTION: When assembled correctly, the hinge is tight against the cabinet.
ATTENTION: The screws must be properly tightened. Turn the screws until snug. Then tighten the screws a minimum of 1/2 turn using both hands.
7REHANG THE FREEZER DOOR
With a flat blade screwdriver, remove the plug button from the left side (top of door) and install on the right.
Place the freezer door on the center hinge over the pin.
Raise the top hinge by hand and insert the top hinge pin into the hole in the door. Then swing the door shut.
8ALIGN THE DOORS
Align the freezer door with the fresh food door so that the gap between the doors is even.
Tighten the top hinge screws by turning them until snug. Then turn the screws a minimum of 1/2 turn using both hands.
Install the hinge cover over the top hinge.
11
