Installation Instructions
REVERSING THE DOOR SWING (CONT.)
2
REMOVE THE FRESH FOOD DOOR
Tape the door shut with masking tape.
Remove the center hinge and shim by removing the screws (some models have lock washers with each screw). Lift up the hinge to remove it.
NOTE: Some models have a washer between the center hinge and the top of the fresh food door. Do not lose.
Remove the tape holding the door shut.
Lift the fresh food door up and off the bottom hinge.
Set the door
NOTE: On some models, when removing the door, watch for washer(s) between the bottom hinge and the bottom of the fresh food door that may stick to the door. Do not lose.
CAUTION: Do not let door drop
to the floor. To do so could damage the door stop.
3
TRANSFER TOP HINGE TO THE LEFT
Using a flat blade screwdriver, remove the plug button and hinge hole cover. Be careful of the paint finish.
Reinstall the hinge hole cover and the plug button on the right side by inserting it into the holes vacated by the top hinge screws.
Reassemble the top hinge (and shim) on the left side, turning the screws just enough to hold the hinge
in place.
9
